Updated November 1, 2026 · Prices checked November 2026
Quick answer: A walk-in shower costs $4,000 to $20,000 installed, and a typical project runs about $12,000, per This Old House (October 2026). A basic prefab walk-in costs $4,000 to $7,000 and a midrange tiled one $8,000 to $13,000. Curbless showers run $8,000 to $15,000 in its tub-to-shower guide. Drain, waterproofing, tile and glass set the final price.
This guide breaks down walk-in shower cost by type, size and add-on, so you can price your own project before you call a contractor. It covers the shower only. For the whole room, see our bathroom remodel cost guide, which prices vanities, toilets, flooring and full remodels by size.

How much does a walk-in shower cost by type?
A prefab walk-in shower costs about $4,000 to $7,000 installed, a midrange tiled one $8,000 to $13,000, and a high-end custom shower $14,000 to $20,000 or more, per This Old House’s walk-in shower cost guide (updated October 2026). Most homeowners in its survey spent $10,000 to $20,000.
Other sources land lower because they price a smaller scope. Fixr’s walk-in shower guide (March 2025) gives $5,000 to $11,000, with an average of $8,000. It says a prefab shower can cost as little as $2,000 with labor, while a custom one starts closer to $5,000. This Old House’s 2026 tub-to-shower guide prices each shower type as a conversion, and those are the figures our other bathroom guides use.
| Shower type | Installed cost | Source |
|---|---|---|
| Prefab shower stall (in place of a tub) | $2,000–$6,000 | This Old House, tub-to-shower guide |
| Basic prefab walk-in | $4,000–$7,000 | This Old House, walk-in guide |
| Walk-in shower (in place of a tub) | $5,000–$12,000 | This Old House, tub-to-shower guide |
| Tile shower (in place of a tub) | $6,000–$12,000 | This Old House, tub-to-shower guide |
| Midrange tiled walk-in | $8,000–$13,000 | This Old House, walk-in guide |
| Curbless shower | $8,000–$15,000 | This Old House, tub-to-shower guide |
| High-end custom walk-in | $14,000–$20,000+ | This Old House, walk-in guide |
| Wet room (whole floor waterproofed) | $11,000–$22,000 | Fixr (March 2025) |
Source: This Old House walk-in shower guide (October 2026) and tub-to-shower guide (March 2026), checked November 2026.
Prefab kit or custom tile?
Prefab is cheaper because it needs less labor and less on-site waterproofing. Fixr says a prefab shower body saves about $5,000 on average over a custom walk-in. Custom tile costs more but fits any size, takes a bench or niche, and lets you pick the drain and tile.
- Prefab (acrylic, fiberglass or composite): one-piece or multi-piece kits with a molded base. Fastest to install and fewest seams.
- Custom tiled: a mortar or foam shower pan, a waterproofing membrane, then tile. More trades and more days on site.
- Curbless (zero-entry): a tiled shower with no step, which usually means lowering or building up the floor.
Prefab, tile or tileless: what do the wall materials cost?
Grout-free panels in acrylic, composite stone or solid surface cost the least, and tile walk-in shower cost starts around $5,000 to $6,000, per Fixr’s material table (March 2025). Fixr also gives a rule of thumb of about $300 per square foot for a prefab walk-in shower and about $600 for a custom one.
| Wall and surround material | Installed cost (Fixr) | Grout lines? |
|---|---|---|
| Acrylic | $2,000–$5,000 | No |
| Composite stone | $2,000–$6,000 | No |
| Solid surface | $2,000–$8,000 | No |
| Fiberglass | $4,000–$8,000 | No |
| Glass tile | $5,000–$12,000 | Yes |
| Ceramic tile | $6,000–$12,000 | Yes |
| Natural stone | $6,000–$20,000 | Yes |
| Porcelain tile | $7,000–$14,000 | Yes |
Prefab panels stay cheap because they go up in a few large sheets. Tile adds a pan, a membrane and days of setting and grouting.
Why do curbless showers cost more?
A curbless shower sits flush with the bathroom floor, so it needs subfloor work, This Old House says, and that moves it into a higher price tier. Its curbless shower cost range is $8,000 to $15,000.
Fixr’s type table shows a lower $6,000 average for a curbless or barrier-free shower, and Fixr also says a custom 60 x 60 inch curbless shower can reach $20,000 or more. Neither page explains the gap. The likely reason is scope: a prefab barrier-free base is a smaller job than lowering a tiled floor for a flush entry.
What does it cost to replace a bathtub with a walk-in shower?
The cost to convert a tub to a walk-in shower is $2,000 to $12,000, per This Old House’s 2026 survey-based guide, and $5,000 to $12,000 when the new shower is a true walk-in. Fixr’s conversion guide (January 2025) gives an average of $4,000 and a range of $1,200 to $10,000, with high-end custom work up to $20,000.

The tub-to-shower remodel cost depends on what happens to the old tub space. A prefab base that fits the old 5-foot alcove keeps the drain close to where it was. A larger tiled shower or a curbless entry means new framing, a new pan and often a moved drain.
| Conversion line item | Cost | Source |
|---|---|---|
| Remove and haul away the old tub | $300–$1,200 | This Old House |
| Tub removal (Fixr) | About $300; $200–$1,000 | Fixr |
| Prefab kit, materials | $2,000–$3,000 | Fixr |
| Prefab kit, installation labor | About $1,000 | Fixr |
| Plumber to cap the tub faucet and add piping | $100–$250 | Fixr |
| Move the drain line | $900–$1,100 | This Old House |
| Install or upgrade the shower valve | $700–$1,200 | This Old House |
| Add or move supply lines | $700 or more | This Old House |
| Structural reinforcement | $1,000 or more | This Old House |
| Downsize a window in the shower wall | $600–$1,200 | Fixr |
Fixr adds a simple size rule: about $320 per square foot of old tub space. Houzz found that when a tub comes out, 79% of homeowners use the space to enlarge the shower, per its 2026 bathroom trends study. For tub-swap ideas in tight rooms, see our small bathroom remodel ideas.
Glass door, fixed panel or doorless: what does each cost?
A framed glass door costs $400 to $1,200 installed and a frameless one $1,200 to $3,000, per This Old House. A doorless shower skips that line entirely, and a single fixed panel sits in between.
| Glass option | This Old House (installed) | Fixr (March 2025, material only) |
|---|---|---|
| Framed glass door | $400–$1,200 | $300–$1,200 |
| Frameless glass door | $1,200–$3,000 | $900–$2,300 |
| Custom glass enclosure | From about $3,000 | $1,800–$5,000 |
| Neo-angle (corner) door | Not listed | $1,500–$3,500 |
| Shower screen (single glass panel) | Not listed | $400–$700 |
| Doorless | No glass cost | No glass cost |
Frameless doors cost more because they use thicker tempered glass, 3/8 to 1/2 inch, This Old House says. None of the guides reviewed prices a doorless build separately. Ask your contractor whether your layout needs a fixed panel to keep spray inside, since that decides whether doorless really saves the glass budget.
What do waterproofing and the drain cost, and why do they matter?
A shower pan costs $800 to $3,000 and a backer board and waterproofing system $800 to $1,500, per This Old House’s walk-in guide. They are the parts you never see and the ones that fail most expensively, so they are the worst place to cut.
| Component | Cost | Source |
|---|---|---|
| Prefab shower pan | $800–$1,500 | This Old House, walk-in guide |
| Custom tile shower pan | $1,200–$3,000 | This Old House, walk-in guide |
| Custom shower pan, installed | $1,500–$3,000 | This Old House, shower remodel guide |
| Backer board and waterproofing system | $800–$1,500 | This Old House, walk-in guide |
| Shower liner (waterproofing system), installed | $1,500–$2,000 | This Old House, shower remodel guide |
| Waterproof membrane | $1–$4 per sq ft | This Old House, shower remodel guide |
| Shower drain, installed | $400–$500 | This Old House, shower remodel guide |
| Schluter Kerdi-Line 32-inch frame and solid grate (one retail listing) | $459.53 | Floor & Decor |
A linear drain is a long channel drain, usually set along one wall or at the shower entry. It lets the floor slope in one plane, which suits curbless showers and large tiles. The single Schluter Kerdi-Line listing above notes that grate assemblies are sold separately, but it does not say clearly whether the channel body is included. Treat it as one retail parts price before labor, and expect it to change.
Skipping good waterproofing is a false saving. In This Old House’s tub-to-shower survey, water damage (32%) was among the most frequent surprise costs. It also puts mold remediation at $500 to $6,000 and subfloor, framing or drywall repair at $1,500 to $5,000 or more. Shower pans and waterproofing are work for a licensed pro, and a plumbing permit usually applies.
What does a walk-in shower for seniors cost?
A safer shower for older adults mostly means grab bars, a seat and a low or zero entry. Grab bars cost $150 to $500 each installed and a fold-down seat $300 to $800, per This Old House. A curbless entry is the expensive part, at $8,000 to $15,000 for the whole shower.
| Feature | Cost | Source |
|---|---|---|
| Grab bar, installed | $150–$500 each | This Old House |
| Grab bar (Fixr add-on price) | $85–$300 each | Fixr |
| Fold-down shower seat, installed | $300–$800 | This Old House |
| Built-in bench | $100–$500 | Fixr |
| Handheld showerhead, installed | $100–$300 | This Old House |
| Slip-resistant floor | $200–$1,000 | Fixr |
| Curbless shower | $8,000–$15,000 | This Old House |
Houzz found that homeowners renovating to age in place most often add grab bars (63%). Among them, 55% install low-curb showers and 32% choose curbless ones. The US Access Board’s ADA guide to bathing rooms is a useful design reference even for a private home:
- Grab bars sit 33 to 36 inches high, measured to the top of the gripping surface.
- A standard roll-in shower is at least 30 inches deep and 60 inches wide.
- A roll-in shower can have a threshold up to 1/2 inch if it is beveled.
- Shower seats sit 17 to 19 inches above the floor.
The same guide notes that in dwelling units, grab bars and a transfer-shower seat are not required if the walls are reinforced so they can be added later. Adding blocking while the walls are open is a cheap way to keep that option. For a full accessible bath, Remodeling magazine’s 2025 Cost vs. Value report prices a universal design 5×7 bath, which swaps the tub for a curbless tiled walk-in shower, at $42,183.
If you add a shower feature for a disabled person’s medical condition, the cost may count as a medical expense. IRS Publication 502 (for 2025 returns) lists “installing railings, support bars, or other modifications to bathrooms” among improvements that usually don’t raise a home’s value, so their cost “can be included in full as medical expenses.” Changes made for looks or personal preference don’t qualify. Ask a tax professional before you count on it.
What does it cost to install a walk-in shower? Labor vs materials
Labor is usually 40% to 60% of a walk-in shower’s total, per both Fixr and This Old House. Fixr puts the labor at about $2,000 for a prefab install and an average of $4,800 for a custom shower.
| Cost item | Typical cost | Source |
|---|---|---|
| Labor share of total | 40%–60% | Fixr; This Old House |
| Labor, prefab install | About $2,000 | Fixr |
| Labor, custom shower | About $4,800 average | Fixr |
| Plumber | $75–$150 per hour | Fixr bathroom guide |
| Tile installer | $8–$14 per sq ft | Fixr bathroom guide |
| Ceramic or porcelain tile | $12–$30 per sq ft | This Old House |
| Natural stone tile | $20–$50 per sq ft | This Old House |
| Shower valve and trim kit | $500–$1,200 | This Old House |
The surveys show both sides push the bill. In This Old House’s June 2026 shower remodel cost data, 74% of homeowners named materials as a major cost driver and 53% said labor weighed heavily. For labor by trade across the whole room, see our 5×10 bathroom remodel cost guide.
What adds the most to the cost?
Moving the drain, going curbless, choosing stone tile and adding steam add the most. Size matters too: Fixr’s custom price nearly triples from a 36 x 36 inch shower to a 60 x 60 inch one.
| Shower size (inches) | Prefab (Fixr) | Custom (Fixr) | Custom (This Old House) |
|---|---|---|---|
| 36 x 36 | $2,700 | $5,400 | $8,500–$9,000 |
| 36 x 48 | $3,600 | $7,200 | $9,000–$9,500 |
| 36 x 60 | $4,500 | $9,000 | $9,500–$10,000 |
| 48 x 48 | $5,000 | $10,000 | Not listed |
| 60 x 60 | $7,500 | $15,000 | Not listed |
| 60 x 72 | $9,000 | $18,000 | Not listed |
This Old House’s size figures come from its shower remodel guide (June 2026) and assume a custom shower with all its parts. Fixr’s are from March 2025. The other big cost drivers:
- Moving the drain: $900 to $1,100 per This Old House, and over $2,000 with several plumbing changes. Fixr says hiring a plumber to move drain and supply lines adds $200 to $500 in labor.
- Tile choice: natural stone runs $20 to $50 per sq ft against $12 to $30 for ceramic or porcelain, per This Old House.
- Steam: Fixr prices a steam shower upgrade at $1,000 to $6,000.
- Hidden damage: This Old House found nearly 70% of tub-to-shower projects hit at least one hidden cost, led by structural repairs (38%), water damage (32%) and unplanned plumbing (29%).
- Permits: $100 to $500 per Fixr, or a few hundred dollars to $1,000 or more per This Old House.
Source: This Old House tub-to-shower guide (grab bar, seat, glass, drain) and Fixr walk-in shower guide (niche, steam), checked November 2026.
Walk-in shower cost estimator: how to price your own project
Start with a base price for your size and type, then add glass, plumbing changes, extras, the permit and a contingency. The steps below use the cited figures from this guide. The sums are a planning range, not a quote.
| Step | What to add | Figure to use |
|---|---|---|
| 1. Base by size and tier | Prefab or custom price for your size | Size table above (Fixr), e.g. 48 x 48 custom $10,000 |
| 2. Glass | None, framed or frameless | $0, $400–$1,200 or $1,200–$3,000 |
| 3. Plumbing changes | Drain move, new valve | $900–$1,100 drain; $700–$1,200 valve |
| 4. Extras | Niche, grab bars, seat | $100–$400 niche; $150–$500 per grab bar; $300–$800 seat |
| 5. Permit | Local plumbing or building permit | $100–$500 |
| 6. Contingency | Hidden damage and changes | 10%–20% of steps 1 to 5 |
Example (my calculation): a 48 x 48 inch custom shower at $10,000, plus a framed door at $400 to $1,200 and a permit at $100 to $500, comes to $10,500 to $11,700. Adding a 10% to 20% contingency gives about $11,550 to $14,040. Fixr’s size table does not say whether glass is included, so the door may be partly counted twice. The total still sits close to This Old House’s typical project of about $12,000.
How can you save on a walk-in shower?
Keep the drain and valve where they are, choose a prefab base or kit, and put tile money into the wet walls only. Those three choices remove the largest variable costs in the tables above.
- Fit the old footprint. A shower base sized to the old tub alcove avoids a $900 to $1,100 drain move.
- Go prefab where you can. Fixr puts the average saving over custom at about $5,000.
- Pick a low curb over curbless unless you need a roll-in entry. Houzz’s aging-in-place group chose low curbs more often than curbless.
- Use ceramic or porcelain instead of stone, and a framed door or single panel instead of a frameless enclosure.
- Get at least 3 detailed quotes, as This Old House advises, and compare the pan, waterproofing and drain lines side by side.
- Hold back 10% to 20% as a contingency, This Old House’s figure for tub-to-shower jobs.

How long does a walk-in shower take to install?
Install work can take as little as 2 days for a prefab swap that matches the old tub size, and 1 to 2 weeks or longer for custom work, per Fixr. Most full shower remodels take 3 to 4 weeks from demolition to completion, per This Old House.
| Project | Typical time | Source |
|---|---|---|
| Prefab conversion that matches the old tub size | As little as 2 days | Fixr |
| Professional tub-to-shower conversion | 3–7 days | This Old House |
| Custom tile or curbless shower | A week or longer | This Old House |
| Custom conversion with window or layout changes | 1–2 weeks or longer | Fixr |
| Shower remodel, demolition to completion | 3–4 weeks (most common) | This Old House, shower remodel guide |
The day counts cover work on site. In This Old House’s walk-in shower survey, 37% of bathroom renovations that included a walk-in shower took 3 to 4 weeks and 22% took 1 to 2 months. In This Old House’s tub-to-shower survey, living without a bathroom was the top frustration (39%), so plan for a second bathroom or a short stay elsewhere.
Can you get a one-day walk-in shower?
Yes, with acrylic systems that fit the old space. This Old House’s Bath Fitter review (June 2026) says the company installs acrylic shower liners in as little as one day. It gives no price and says cost depends on size, design and the condition of the existing bath.
For a benchmark, use Fixr’s prefab conversion figures: $2,000 to $3,000 in materials plus about $1,000 in labor. Ask any one-day installer whether the drain and valve stay in place, since moving them adds plumbing time and cost.
Can you install a walk-in shower yourself?
You can do demolition, painting and some trim yourself, but plumbing and waterproofing belong to a licensed pro with a permit. This Old House suggests DIY for cosmetic jobs like showerheads, trim and regrouting, and a pro for waterproofing and plumbing.
- Hire a licensed plumber for the drain, the valve and any moved supply lines. A permit and inspection usually apply.
- Hire a pro for the pan and membrane. A leak here can mean mold remediation and subfloor repair later.
- Hire a licensed electrician for steam generators, heated floors or new lighting in the wet area.
- Hire a contractor or engineer before cutting or notching floor joists for a curbless shower.
- Test older homes first. The EPA says anyone paid to disturb paint in housing built before 1978 must be lead-safe certified, and the EPA’s asbestos guide lists textured paint and patching compound among materials that can contain asbestos.
In This Old House’s walk-in shower survey, 51% of homeowners hired licensed pros, 24% mixed pro and DIY labor, and only 20% did most of the work themselves.
Does a walk-in shower add resale value?
There is no solid resale figure for a walk-in shower alone. The closest data is Remodeling magazine’s 2025 Cost vs. Value report: a midrange bath remodel recouped 80% of its $26,138 cost, and the universal design bath with a curbless shower recouped 61% of $42,183. In This Old House’s survey, 64% of walk-in shower owners felt their renovation raised their home’s value, which is an opinion, not an appraisal.
If you plan to sell soon, This Old House advises keeping at least one bathtub elsewhere in the home for resale value. It adds that replacing a secondary tub can broaden buyer interest.
The walk-in shower I would budget for
I would plan a tiled walk-in that keeps the old drain location, with a low curb, porcelain tile and a framed door or single glass panel. That sits in This Old House’s $8,000 to $13,000 midrange tier and avoids the $900 to $1,100 drain move.
I would not cut the pan or membrane, since water damage (32%) was among the most frequent surprise costs in This Old House’s conversion survey. I would go curbless only for a real mobility need, and add wall blocking for grab bars either way.
Planning a project? Use the bathroom remodel cost guide to price the rest of the room around your new shower, or send a question. We share research and cost data and do not give contractor quotes.
| Guide | What it covers |
|---|---|
| Bathroom Remodel Cost | Whole-room costs by size, tier and region, hidden costs and a budget checklist |
| 5×10 Bathroom Remodel Cost | 5×10, 5×7 and 5×8 costs, labor by trade, layout and timeline |
| Small Bathroom Renovation Trends 2026 | Bigger showers, low-curb entries and other small bath ideas with costs |
| Small Bathroom Remodel Ideas | 22 space-saving fixes sorted by budget, each with a sourced cost |
| Small Bathroom Remodel Cost | 3 line-item budgets for a 36 sq ft bath, from about $3,200 to $27,000 |
| Bathroom Remodeling guides | Every bathroom guide on the site |
FAQ
How much does a walk-in shower cost?
Most cost $4,000 to $20,000 installed, with a typical project around $12,000, per This Old House. Fixr’s March 2025 average is lower, at $8,000.
Bathtub vs walk-in shower cost: which is cheaper?
A prefab tub is usually cheaper than a custom walk-in shower. Fixr’s FAQ puts a prefab tub at around $5,700 and a custom walk-in shower at about $8,000. A prefab shower can cost less than either, from about $2,000 with labor, per Fixr. If you plan to sell soon, This Old House advises keeping at least one bathtub in the home.
What is the walk-in shower remodel cost if I keep the same footprint?
This Old House puts a typical shower remodel at $8,500 to $10,000. A prefab kit replacement costs $3,000 to $6,000 with installation.
How much more does a curbless shower cost?
This Old House prices a curbless shower at $8,000 to $15,000, against $5,000 to $12,000 for a standard walk-in in place of a tub. The extra mostly goes to subfloor work.
Do I need a permit for a walk-in shower?
Usually yes, once the drain, valve or supply lines change. Fixr puts permits at $100 to $500. Check with your local building department.
What is the cheapest way to get a walk-in shower?
A prefab shower kit sized to the old tub alcove. Fixr says a prefab shower can cost as little as $2,000 with labor.
Sources
- This Old House, “How Much Does a Walk-In Shower Cost? (2026 Pricing)” (updated October 7, 2026), thisoldhouse.com, checked November 2026
- This Old House, “How Much Does Tub-to-Shower Conversion Cost? (2026 Guide)” (updated March 4, 2026), thisoldhouse.com, checked November 2026
- This Old House, “Bath Fitter Reviews (2026 Guide)” (updated June 17, 2026), thisoldhouse.com, checked November 2026
- This Old House, “How Much Does a Shower Remodel Cost? (2026)” (updated June 1, 2026), thisoldhouse.com, checked November 2026
- Fixr, “How Much Does It Cost to Install a Walk-In Shower?” (updated March 4, 2025), fixr.com, checked November 2026
- Fixr, “Bathtub to Shower Conversion: Cost, Tips & More” (published January 23, 2025), fixr.com, checked November 2026
- Fixr, “How Much Does It Cost to Remodel a Bathroom? [2026 Data]” (updated January 27, 2026), fixr.com, checked November 2026
- Houzz, “5 Bathroom Remodeling Trends to Know in 2026” (2026 U.S. Houzz Bathroom Trends Study), houzz.com, checked November 2026
- Remodeling Magazine (JLC), “2025 Cost vs Value Report”, jlconline.com, and “Bath Remodel | Universal Design” project description, jlconline.com, checked November 2026
- US Access Board, “Chapter 6: Bathing Rooms” (Guide to the ADA Accessibility Standards), access-board.gov, checked November 2026
- Floor & Decor, “Schluter Kerdi-Line 3/4in. Frame 32in. Solid Grate” product listing, flooranddecor.com, checked November 2026
- US EPA, “Lead Renovation, Repair and Painting Program”, epa.gov, and “Learn About Asbestos”, epa.gov, checked November 2026
- IRS, “Publication 502: Medical and Dental Expenses”, irs.gov, checked November 2026